|
Fire GL 1000 Pro |
|
|
|
|
|
|
|
|
|
Technical Data |
|
- 3Dlabs' PERMEDIA 2 high-performance 2D/3D/Video
graphics processor with
- integrated geometry setup processor
- integrated standard VGA controller
- Standard 15-pin video output with DDC2B support
- Connector and support for StereoGraphics
SimulEyes VR
3D stereo vision glasses (not on AGP-NLX cards)
- YUV input connector for DVD or
MPEG decoder
- PCI 2.1 Bus compatible, or
- AGP 1.0 compatible
- NLX and ATX versions
- Hardware support for OpenGL, Heidi, and Direct3D
- 4 MB SGRAM onboard memory, or
- 8 MB SGRAM onboard memory
|
|
|
|
|
|
Video Modes |
|
All video
modes comply to VESA DMT (Discrete Monitor Timing) or
VESA GTF (General Timing Format) standards. |
|
2D Screen
Resolution |
Colors |
Horizontal
Frequency (kHz) |
Refresh
Rate (Hz) |
Memory
required
(MB) |
640 x 480 |
256, 32/64K
16.7M |
31.5 - 61.8 |
60 - 120 |
4 (3D)* |
|
|
|
|
|
800 x 600 |
256, 32/64K |
37.6 - 77.1 |
60 - 120 |
4 (3D)* |
800 x 600 |
16.7M |
37.6 - 77.1 |
60 - 120 |
8 (3D) |
|
|
|
|
|
1024 x 768 |
256 |
48.3 - 98.8 |
60 - 120 |
4* |
1024 x 768 |
32/64K |
48.3 - 98.8 |
60 - 120 |
8 (3D) |
1024 x 768 |
16.7M |
48.3 - 81.4 |
60 - 100 |
8 (3D) |
|
|
|
|
|
1152 x 864 |
256 |
53.7 - 111.1 |
60 - 120 |
4* |
1152 x 864 |
64K |
53.7 - 91.5 |
60 - 120 |
8 |
1152 x 864 |
16.7M |
53.7 - 77.1 |
60 - 85 |
8 |
|
|
|
|
|
1280 x 1024 |
256 |
63.6- 108.5 |
60 - 100 |
8* |
1280 x 1024 |
64K |
63.6 - 91.4 |
60 - 100 |
8 |
1280 x 1024 |
16.7M |
63.6 - 80.2 |
60 - 100 |
8 |
|
|
|
|
|
1600 x 1200 |
256 |
74.5 - 107.2 |
60 - 75 |
8* |
1600 x 1200 |
64K |
74.5 |
60 |
8 |
|
|
|
|
|
1600 x 1280 |
256, 32K |
79.5 - 107.2 |
60 - 80 |
8* |
|
|
|
|
|
1920 x 1080 |
256, 32K |
67.5 - 84.6 |
60 - 75 |
8* |
HighColor (64K/65,536 simultaneous colors) - 16
bit
TrueColor (16.7M/16.7 mill. simultaneous colors) - 24/32
bit
(3D) :Full 3D hardware acceleration with double
buffer and Z-buffer support
*: No 3D hardware
acceleration for 256 colors (8 bit) display to prevent
color problems: some applications support full hardware
acceleration only in True Color and High Color video
modes.
|
|
|
|
|
|
|
|
|
|
3D
Performance |
|
- 83 million texture mapped
pixels/second, perspective corrected, bilinear
filtered
- 42 million texture mapped
Z-buffered pixels/second, perspective corrected,
bilinear filtered
- up to 1 million texture mapped
polygons/second
|
|
|
|
|
|
|
|
|
|
Memory
Addresses |
|
It is
necessary to ensure that the I/O and memory addresses
reserved for the graphics board are not used by other
hardware devices.
The integrated on-board VGA controller of your Fire GL
1000 Pro uses the following addresses (hex):
|
|
I/O address: |
|
Standard VGA I/O: |
3B0-3DF |
Memory addresses: |
|
Video RAM |
A000-BFFF |
Video ROM |
C000-C7FF |
|
|
Note:
You cannot change the addresses of your Fire GL 1000 Pro.
In case of an address conflict, try to modify the I/O
address of the add-on card that causes the conflict.
|
|
|
|
|
|
|
|
VGA Output
Connector |
|
Pin |
Function |
Pinning of the 15-pin Sub-D VGA Output
|
1 |
Red |
2 |
Green
|
3 |
Blue |
4 |
not
connected |
5 |
ground
(analog) |
6 |
Red
Return (ground) |
7 |
Green
Return (ground) |
8 |
Blue
Return (ground) |
9 |
+ 5V
(fused 750 mA) |
10 |
ground
(sync return) |
11 |
not
connected |
12 |
SDA
(DDC Data) |
13 |
Horizontal
Sync (+) |
14 |
Vertical
Sync (-) |
15 |
SCL
(DDC Clock) |
|
|
|
|
Stereo Sync
Output Connector |
|
Pin |
Function |
Pinning
of the 3-pin Mini-DIN
Stereo Sync (SimulEyes) Output
|
1 |
+ 5V
DC
(fused 750 mA) |
2 |
ground |
3 |
StereoSync |
|
|
|
|
|
|
DVD Board
Connector |
|
|
|
|
Pin |
Function |
|
1 |
ground |
2 |
VID
[0] |
3 |
ground |
4 |
VID
[1] |
5 |
ground |
Pin |
Function |
|
6 |
VID
[2] |
17 |
ground |
|
7 |
VACTIVE |
18 |
PIXCLK |
|
8 |
VID
[3] |
19 |
ground |
|
9 |
FIELD |
20 |
HREF |
|
10 |
VID
[4] |
21 |
ground |
|
11 |
VREF |
22 |
not
connected |
|
12 |
VID
[5] |
23 |
not
connected |
|
13 |
I2CCLK |
24 |
not
connected |
|
14 |
VID
[6] |
25 |
I2CDAT |
|
15 |
ground |
26 |
ground |
|
16 |
VID
[7] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flash BIOS Upgrade |
|
Your Fire GL 1000 Pro is
equipped with a Flash BIOS. That means upgrading to
future versions of the card's BIOS is simple and easy.
For a BIOS upgrade you do not need to remove the card
from the computer, and swapping chips is not required. Contact
Diamond's BBS for
information on
- downloading the BIOS upgrade
- how to perform the BIOS upgrade
|
|
|
|
|