Diamond FIRE GL 1000 Pro Drivers for Alpha based NT 4.0 
          -------------------------------------------------------- 
 
 
Diamond Multimedia                                      Release 1297 


Windows NT 4.0 Installation Notes
----------------------------------

1.  Once you have confirmed that you are running in Standard VGA, place the
    FIRE GL 1000 Pro Windows NT Driver Diskette into the floppy drive
    or the CD in your CD drive.

2.  Open the Windows NT Control Panel.

3.  Select the Display icon.

4.  Select Change Display Type.

5.  Select Change.

6.  Select Other.

7.  Type:
	    <CD-drive>:\Install\Graphic\Fire1kp\alphant4\
    or select the directory with this drivers.  

8.  You will then be prompted to change your system configuration.
    Select Yes.

9.  When prompted to install Current or New drivers, select the New option.

10.  Confirm the source path.

11.  You need to restart Windows NT 4.0 for the changes to take effect.

Note that the default resolution that installed is 640x480x256 60Hz.

From this point on, you can change your resolution/color depth by
using the Display Icon in the Control Panel.  Select the
"List All Modes" button.  This will display all resolutions and
refresh rates available.  Please use the Test option so that you
can confirm that the selected refresh rate and resolution are
supported by your monitor.



=======================================================================
Diamond Multimedia Systems, Inc.                               (c) 1997
						    All Rights Reserved
=======================================================================