Physically Installing
|
|||
| Fast Track to Technical Support | Table of Contents |
MONSTER 3D DOES NOT REPLACE YOUR CURRENT VIDEO OR GRAPHICS CARD. MONSTER 3D WORKS WITH YOUR CURRENT GRAPHICS CARD TO DELIVER CUTTING EDGE 3D PERFORMANCE.
- With the power off, remove your computer cover. Find
an available PCI slot and remove the bracket and screw. Remember
which cables go to which connectors. You may want to label your computer's
cables before disconnecting them!
- Insert Monster 3D firmly into a PCI slot. Care should be taken to press it evenly and snugly into its slot. Once you are certain Monster 3D is installed properly in its slot, secure it with a screw.
- Connect the lower port on Monster 3D to the monitor port on your existing graphics board with the provided VGA pass-through cable.
- Connect the upper port on Monster 3D to your monitor with a standard monitor cable.
- Secure your computer cover and attach any previously removed cables.
- Use Monster 3D to blast off with the latest and greatest 3D games. Go forth and conquer!
 |
|
 |
|
 |
|